SERVICE, RESTORATION, TRANSFORMATION

THE HOT BLUING SERVICE SHOULD BE PERFORMED EVERY 5-10 YEARS ON ALL 1931 6.35MM FABRIQUE NATIONALE, PSP-25 AND PSA-25 POCKET PISTOLS, DEPENDING ON THE CONDITION OF THE FINISH OF THE PISTOL. 

FOLKS OFTEN INSTRUCT US TO PERFORM THE HOT BLUING SERVICE WHEN THEY ACQUIRE A USED FN 6.35MM, PSP-25 OR PSA-25 POCKET PISTOL. AND THEY OFTEN DO SO AT THE SAME TIME THEY ASK US TO UNDERTAKE THE SPRING REPLACEMENT SERVICE. THEY ALSO PURCHASE SECOND GENERATION, ROUNDED FOLLOWER MAGAZINES AT THIS TIME.

PROJECT SCOPE:

THE PISTOL IS DIS-ASSEMBLED INTO ITS COMPONENT PARTS. PRIOR TO UNDERTAKING RESURFACING AND FINISH, THE PARTS ARE INSPECTED FOR CORRECT DIMENSIONAL TOLERANCES AND FUNCTIONALITY. WE WILL CONTACT YOU BY TELEPHONE TO DISCUSS ANY NON-CONFORMING PARTS OR OTHER ISSUES WE UNCOVER DURING THE DIS-ASSEMBLY PROCESS.

EACH PART IS THEN FINE BRUSH CLEANED IN AN AGGRESSIVE WATER-BASED DETERGENT, AND IF NECESARY CHEMICALLY STRIPPED OF ITS OLD BLUING. IF SIGNIFICANT RUST AND/OR PITTING IS EVIDENT, WE WILL GLASS BEAD BLAST THE AFFECTED SURFACE OF THE PART WITH 1000 GRIT JAPANESE GLASS AND THEN RESURFACE IT TO OEM SPECIFICATION. WE STRIVE TO NEVER ALTER THE ORIGINAL OEM "LOOK" OF THE PISTOL BUT ALL PARTS ARE RESURFACED PRIOR TO HOT BLUING.

THE PARTS ARE THEN ULTRASONIC CLEANED USING A CONCENTRATED GREASE REMOVING SOLUTION, THEN BATHED IN ACETONE FOLLOWED BY A QUICK DIP IN DE-IONIZED WATER. THEY ARE THEN HOT BLUED IN OUR OWN TANKS FOR 15 MINUTES AT 195F DEGREES. THEREAFTER, THE PARTS ARE DIPPED IN DE-IONIZED WATER FOLLOWED BY A GEAR OIL BATH. EACH PART IS THEN INDIVIDUALLY CLEANED OF RESIDUE USING 0000 STEEL WOOL, SUBJECTED TO A HOT WATER-BASED MILD DETERGENT SCRUB, RINSED AGAIN IN DE-IONIZED WATER, BATHED IN WD-40 AND DRIED USING LINT FREE COTTON TOWELS. NOT AS SIMPLE AS YOU THOUGHT, RIGHT?

THEREAFTER THE PISTOL IS RE-ASSEMBLED FROM ITS COMPONENT PARTS, LUBRICATED WITH GUN OIL, BENCH TESTED, LIVE FIRE TESTED, AND GUARANTEED FUNCTIONAL WHEN WE SHIP IT BACK TO YOU. 

THE HOT BLUING SERVICE INCLUDES A 2 OUNCE CONTAINER OF SAFARI CHARLIE'S GUN LUBE, COMPLETE OEM PACKAGING, BARREL CLEANING BRUSH AND ONE OF OUR PSA HATS.

RETURN POSTAGE IS BY U.S. 3 DAY PRIORITY MAIL WITH SIGNATURE REQUIRED FOR DELIVERY. 

READY TO SHIP? REMOVE ALL AMMUNITION FROM BARREL AND MAGAZINE. SEPARATE THE MAGAZINE FROM THE PISTOL. PACK BOTH WELL USING CRAFT PAPER OR BUBBLE WRAP. PLACE IN A SMALL ($9.45) US POST OFFICE FLAT RATE 3 DAY PRIORITY MAIL BOX SO THAT THE PISTOL AND MAGAZINE CANNOT MOVE AROUND INSIDE THE BOX. PLACE A SHEET OF PAPER INSIDE THE SHIPPING BOX CONTAINING YOUR NAME, HOME ADDRESS, PHONE NUMBER AND EMAIL ADDRESS. 

THE IDEAL WAY TO SHIP YOUR PISTOL TO US IS BY USING A SMALL FLAT RATE U.S. POSTAL SERVICE 3 DAY PRIORITY MAIL BOX ($9.45). NO NEED TO DECLARE CONTENTS OR INSURE. BUT KEEP THE RECEIPT - AS IT HAS A TRACKING NUMBER. YOU ARE WELCOME TO USE FED EX OR UPS.

12 MONTH WARRANTY ON THE HOT BLUE FINISH AS WELL AS ALL INSTALLED PARTS AND LABOR.

ONCE YOU ARE READY TO SHIP CALL US FOR OUR PHYSICAL MAILING ADDRESS.

PURCHASE THIS SERVICE BY ADDING THIS ITEM TO YOUR SHOPPING CART. 

INCLUDE THE SERIAL NUMBER OF YOUR PISTOL IN THE "NOTES" SECTION OF THE SHOPPING CART WHEN CHECKING OUT.

QUESTIONS? READY TO GO? RING US AT: 970-390-5520.

RING US TO DISCUSS. YOU MIGHT BE AMAZED AT WHAT WE CAN DO FOR YOU.

OUR TELEPHONE NUMBER IS: 970-390-5520

SERIAL NUMBER ENGRAVING.

FOR OLD OR NEW .25 CAL FN, PSP OR PSA-25 PISTOL BARRELS.

UP TO 6 LETTERS AND/OR DIGITS. DEAD CENTER BOTTOM-SIDE OF BARREL.

BARREL IS RE-SURFACED TO FACTORY STANDARDS. FEED RAMP IS POLISHED.

THE SPRING REPLACEMENT SERVICE SHOULD BE PERFORMED EVERY 5-10 YEARS FOR ALL 1931 6.35MM FABRIQUE NATIONALE, PSP-25 AND PSA-25 POCKET PISTOLS, DEPENDING ON HOW OFTEN THE PISTOL HAS BEEN FIRED. FOLKS OFTEN UNDERTAKE THIS SERVICE WHEN THEY ACQUIRE A USED FN 6.35MM, PSP-25 OR PSA-25 POCKET PISTOL. AND THEY TEND TO DO SO AT THE SAME TIME THAT THEY HOT BLUE THE PISTOL AND PURCHASE SECOND GENERATION, ROUNDED FOLLOWER MAGAZINES.

SCOPE OF SERVICE:

THE PISTOL IS DIS-ASSEMBLED INTO ITS COMPONENT PARTS. EACH PART IS FINE BRUSHED AND THEN ULTRASONIC CLEANED USING A WATER-BASED CONCENTRATED CLEANER. THEREAFTER EACH PART IS DIPPED IN DE-IONIZED WATER AND THEN BATHED IN WD-40. WE THEN INSPECT EACH PART FOR CORRECT DIMENSIONAL TOLERANCES AND FUNCTIONALITY. WE WILL CONTACT YOU BY TELEPHONE AT THIS TIME IF WE IDENTIFY PARTS THAT ARE FUNCTIONALLY NON-CONFORMING.

ALL SPRINGS ARE REPLACED WITH NEW OEM SPRINGS MANUFACTURED IN BELGIUM.

THE PISTOL IS THEN RE-ASSEMBLED, GUN OIL LUBRICATED, BENCH TESTED, LIVE FIRE TESTED, AND GUARANTEED FUNCTIONAL WHEN WE SHIP IT BACK TO YOU. 

THE SPRING REPLACEMENT SERVICE INCLUDES A 2 OUNCE CONTAINER OF SAFARI CHARLIE'S GUN LUBE, COMPLETE OEM PACKAGING, BARREL CLEANING BRUSH AND ONE OF OUR PSA HATS.

RETURN POSTAGE IS BY U.S. 3 DAY PRIORITY MAIL WITH SIGNATURE REQUIRED FOR DELIVERY. 

READY TO SHIP? REMOVE ALL AMMUNITION FROM BARREL AND MAGAZINE. SEPARATE THE MAGAZINE FROM THE PISTOL. PACK BOTH WELL USING CRAFT PAPER OR BUBBLE WRAP. PLACE IN A FLAT RATE US POSTAL SERVICE 3 DAY PRIORITY MAIL BOX SO THAT THE PISTOL AND MAGAZINE CANNOT MOVE AROUND INSIDE THE BOX. INCLUDE A SHEET OF PAPER PLACED INSIDE THE SHIPPING BOX CONTAINING YOUR NAME, HOME ADDRESS, PHONE NUMBER AND EMAIL ADDRESS. 

THE IDEAL WAY TO SHIP YOUR PISTOL TO US IS BY USING A SMALL FLAT RATE U.S. POSTAL SERVICE 3 DAY PRIORITY MAIL BOX ($9.45). NO NEED TO DECLARE CONTENTS OR INSURE. BUT KEEP THE RECEIPT - AS IT HAS A TRACKING NUMBER. BUT YOU ARE WELCOME TO USE FED EX OR UPS.

12 MONTH WARRANTY ON ALL INSTALLED PARTS AND LABOR.

ONCE YOU ARE READY TO SHIP CALL US FOR OUR PHYSICAL MAILING ADDRESS.

PURCHASE THIS SERVICE BY ADDING THIS ITEM TO YOUR SHOPPING CART. 

INCLUDE THE SERIAL NUMBER OF YOUR PISTOL IN THE "NOTES" SECTION OF THE SHOPPING CART WHEN CHECKING OUT.

QUESTIONS? READY TO GO? RING US AT: 970-390-5520.